Kunststoffschweißtechnik
Starting
and
operating
Chapter 5
08.10.14 Working
instructions
WIDOS RSC 2000
Page 27 of 63
Manually swivel the saw to the 0° position; turn the switch for the clamping
cylinder
to the left and let the saw snap in.
Display:
2
nd
line:
angle 0°
Display of angle: 0°
Press <Planer> in order to have the angle calibrated.
Attention! In case you press <Planer> while the saw is not in 0° position,
the angle is also adjusted to 0 on the display!
5.2.2. How to set the time, date and language
Display:
2
nd
line:
693 rpm 690 rpm
-2894.4mm 0.00
Basic menu
Current date and time
next menu by pressing button <Enter>
Display:
2
nd
line:
diag clk WICON param
_ 10:10
next menu by pressing button <Start>
Display:
2
nd
line:
diag clk WICON param
10:10
Setting the time
with buttons <+> and <->: change the time.
confirm with button <Enter>:
press
button
<Start>
Display:
2
nd
line:
diag clk WICON param
22.11.2000
Setting the date
with buttons <+> and <->: change the date.
confirm with button <Enter>:
press
button
<Start>
Display:
2
nd
line:
language german?
_
several languages are entered
buttons <+> and <->: change the language
button <Enter>: confirm
