Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
08.10.14 Working
instructions
WIDOS RSC 2000
Page 16 of 63
4.2. Operator
console
4.2.1. Operator
panel
No. Name
/
Function
11
Key holder to tension the brake of the cutting tooth chain: to switch on the brake
<0> / to release brake <I>, when the brake is released you may change the cutting
chain.
The key may be withdrawn in position <0>*.
12
Key switch - brake of the cutting chain travel: switches the brake on <0> / brake
released <I>, when the brake has been released, you may shift the cutting chain
manually.
The key may be withdrawn in position <0>*.
13
Control lamp of cutting chain tension: glows in red if the cutting chain is not
tensioned resp. when it is broken
the cutting is stopped resp. may not be started
14
Emergency-stop: stops travel motor, cutting motor and vacuum
15
Start button: to drive the cutting tooth chain into initial position after its activation in
order to adjust
16
Display shows the current parameters, several values can be shown at the same
time.
Operator panel
Switch cabinet with fuses
and servo controllers
Main switch
Front trolleys (adjustable)
Rear trolleys
12
11
13
14
16
15
17
18
19
20
22
24
23
25
26
27
28
30
29
31
32
