Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
08.10.14 Working
instructions
WIDOS RSC 2000
Page 20 of 63
4.5. How to clamp pipes
Clamp the pipe by two clamping belts.
The clamping belts are hanging in the belt holders on the inside or outside; the spring
balancers are guided by the triangles and are then tensioned by the belt winders electrically.
The clamping belt is to be suspended from the inside or outside belt holders according to the
pipe size. Please observe upon selecting the belt holder that the pipe is clamped optimally.
In order to replace the suspension disassemble the respective bolt and suspend the belt
from another bolt.
Holder inside for
tensioning belt (below
the table)
Holder outside for
tensioning belt
Clamping belt noose
Bolt
Spring balancer
Tension belt
Belt winder
Holder inside for
tensioning belt
Holder outside for
tensioning belt
Triangle
