Wenglor SEFB Series Скачать руководство пользователя страница 139

Страница: 139 / 161

Multi-Beam Safety Light Array

139

12. Servicing

DANGER!
Risk of safety device failure!

• No repairs may be carried out on the ESPE.

• No changes or manipulations may be carried out on the ESPE.

12.1 Maintenance

NOTE!

•

This wenglor sensor is maintenance-free.

• The instructions for the annual (see

section 12.4, page 140)

and regular inspection

(see

Section 11.3, page 136)

, as well as cleaning

(see section 12.2, page 139)

must be

observed.

12.2 Cleaning

NOTE!

• The panes of the ESPE must be clean at all times. They must be free from contamination,

scratches or roughening.

• Contamination of any kind has a direct impact on the signal strength of the ESPE and may

result in malfunctions.

• The panes may only be cleaned with the supply voltage disconnected.

• It is advisable to clean the panes regularly. The frequency of the cleaning depends on the level of contami-

nation on the system.

• Cleaning takes place with a clean, soft and damp (to prevent electrostatic charge) cloth, without putting any

pressure on the pane.

• Do not clean the ESPE with solvents or cleaning agents which could damage the device (aggressive, abra-

sive, scratching).

• To guarantee good and lasting legibility of the segment display, the same cleaning measures are recom-

mended as for the panes.

• After cleaning, check the function of the safety device (see

section 12.3, page 140

)

Содержание SEFB Series


































































































































































Результаты поиска

Содержание SEFB Series

Отзывы:

Похожие инструкции для SEFB Series

Бренды по названию

Популярные бренды

Wenglor SEFB Series, Руководство по эксплуатации

Результаты поиска

Содержание SEFB Series

Отзывы:

Похожие инструкции для SEFB Series

Бренды по названию

Популярные бренды