Wenglor SEFB Series, Руководство по эксплуатации

Страница: 40 / 161

Project Engineering 40
a [mm]
Height of the
danger zone C
RO
[mm] Additional horizontal clearance from the danger zone
2600 0 0 0 0
2500 400 400 350 300
2400 550 550 550 500
2200 800 750 750 700
2000 950 950 850 850
1800 1100 1100 950 950
1600 1150 1150 1100 1000
1400 1200 1200 1100 1000
1200 1200 1200 1100 1000
1000 1200 1150 1050 950
800 1150 1050 950 800
600 1050 950 750 550
400 900 700 0 0
200 600 0 0 0
0 0 0 0 0
b [mm] Height of the top edge of the safety field
900 1000 1100 1200
In accordance with EN ISO 13855, the following minimum and maximum heights must be observed.
Number of beams
Beam distance in mm
Height above reference level in
mm
4 300 mm 300 / 600 / 900 / 1,200
3 400 mm 300 / 700 / 1,100
2 500 mm 400 / 900
NOTE!
• If the actual values for a and b are between the values in the table, the next highest value
from the table must be selected.
• A top safety field edge of under 900 mm does not provide adequate protection against
bypassing or crossing over.
• A bottom safety field edge of over 300 mm does not provide adequate protection against
crawling through.