Wenglor SEFB Series Скачать руководство пользователя страница 11

Страница: 11 / 161

Multi-Beam Safety Light Array

2.2 Use for Other than the Intended Purpose

• The product is not suitable for use in potentially explosive atmospheres.

• The product may only be used with accessories supplied or approved by wenglor, or in combination with

products approved by wenglor. A list of approved accessories and combination products can be accessed
at www.wenglor.com on the product detail page.

• The product is not suitable for use in outdoor weather.

DANGER!
Risk of personal injury or property damage in case of use for other than the intended
purpose!

Use for other than the intended purpose may lead to hazardous situations.

• Observe instructions regarding use for intended purpose.

2.3 Personnel Qualifications

• Suitable technical training is a prerequisite.

• In-house electronics training is essential.

• Trained personnel who use the product must have uninterrupted access to the operating instructions.

DANGER!
Risk of personal injury or property damage in case of incorrect initial start-up, opera-
tion and maintenance!

Personal injury and damage to equipment may occur.

• Adequate training and qualification of personnel.

2.4 Modification of Products

DANGER!
Risk of personal injury or property damage if the product is modified!

Personal injury and damage to equipment may occur. Non-observance may result in loss of
the CE mark and the guarantee may be rendered null and void.

• Modification of the product is impermissible.

Содержание SEFB Series


































































































































































Результаты поиска

Содержание SEFB Series

Отзывы:

Бренды по названию

Популярные бренды

Wenglor SEFB Series, Руководство по эксплуатации

Результаты поиска

Содержание SEFB Series

Отзывы:

Бренды по названию

Популярные бренды