18
http://support.weathermatic.com
9.0 Programming for Smart Watering Mode
established. The SLW Weather Sensor provides rain and freeze
pause functions to prevent watering during periods of rain
and freezing weather. The rain override will pause watering
aer a minimum of 1/8th inch of rainfall is received (the factory
setting of 1/8th inch can be changed incrementally up to 3/4
inch by sliding the rain sensor into the desired position). The
SLW Weather Sensor will also pause watering when the outside
temperature drops to 37 degrees Fahrenheit (1.5 degrees
Celsius). The Sensor LED will display RED during these rain
or freeze periods. 24VAC power to the valves is reconnected
when the temperature is again above 37 degrees F (1.5 degrees
Celsius). However, aer a rain event, the SmartLine® controller will
continue to pause watering aer the rain sensor has disengaged,
in order to prevent over-watering.
9.2.6 MODE Button:
Press the MODE
button on the control
panel to place the
SmartLine® controller
in the SMART mode. A GREEN LED on the SMART position will
confirm that you have communicated with the SLW Weather
Sensor. If there is no SLW Weather Sensor installed or ZIP Code
or Latitude or time/date setting and at least one zone with
a sprinkler type set, pressing the MODE button will flash the
SMART LED to RED and then return to the BASIC mode. When
this occurs, you can press and hold the MODE button to see
a scrolling message indicating the reason SMART mode is not
available.
9.0 Programming for Smart Watering Mode
SMART
BASIC
WATERING
MODE
Содержание SmartWire 9600TW
Страница 41: ...35 80 N 70 N 60 N 50 N 40N 30 N 20 N 10 N 0 10 S 20 S 30 S 40 S 50 S 60 S 70 S 80 S ...
Страница 47: ......
Страница 48: ...AD431_revC ...