Weathermatic SmartWire 9600TW Скачать руководство пользователя

Страница: 32 / 48

http://support.weathermatic.com

10.0 Advanced Menu

10.17 CON PGM

Select the ability to run 1, 2,3, or all 4 programs simultaneously.

Default is two simultaneous programs. Program D will run with

high priority.

10.18 CLR PGM

This feature allows the user to clear all programmed values

specific to a selected program. All zone run times and daily

start times will be set to OFF; watering days will default to Days

of the Week (all on); Season % will equal 100% for all months

and Run/Soak will be OFF. Omit times/days are not reset when

clearing a program.

From the CLR PGM menu, press NEXT and the display will show

KEEP. Use PGM button to select program to be cleared. Then,

press either the UP or DOWN button to display CLEAR. With

CLEAR showing in the display, either press NEXT or BACK or

turn the dial to complete the clearing of the selected program.

Likewise, with KEEP showing in the display, either press NEXT or

BACK or turn the dial to keep the selected program.

10.19 CLR ALL

This feature is similar to CLR PGM except that it clears all user

programmed data for all four programs and returns most

Advanced Menu changes to factory defaults. Turn the dial to

Advanced Menu and use an arrow button to select CLR ALL.

Press the NEXT button and KEEP will show in the display. Press

the UP and DOWN button to select CLEAR. Press NEXT to clear

all programs. The display will show CLEARING to confirm that all

programs have been cleared. Note: This function is not the same

as the Total Master Reset as described under 7.1 in your Owner’s

Manual.

10.20 MODBUS

This displays a static address along with a user programmable

address to integrate with third party software

10.20.1 SHORTADD

10.21 ABOUT

Provides information on software version in the SmartLine®

controller.

10.21.1 MODEL

Model

10.21.2 VERSION

Version

10.21.3 BUILD

Build version

10.22 GROW IN

Grow In allows you to set up a new landscape grow-in watering

program that will automatically expire aer a set number of days

that you select. At the end of your selected grow-in period, the

controller will automatically retrieve your long-term watering

program to avoid the necessity of having to return to the

controller.

Step 1:

Set up your long-term SMART or BASIC watering

program.

Step 2:

Go to Advanced Menu and select DEFAULT. Press

Содержание SmartWire 9600TW

















































Результаты поиска

Содержание SmartWire 9600TW

Отзывы:

Похожие инструкции для SmartWire 9600TW

Бренды по названию

Популярные бренды

Weathermatic SmartWire 9600TW, Руководство пользователя

Результаты поиска

Содержание SmartWire 9600TW

Отзывы:

Похожие инструкции для SmartWire 9600TW

Бренды по названию

Популярные бренды