Weathermatic SmartWire 9600TW, Руководство пользователя

Страница: 23 / 48

17
http://support.weathermatic.com
9.0 Programming for Smart Watering Mode
Use the UP and DOWN buttons
to select Clay, Loam or Sand
soil type for each zone. After
you have selected a soil type
for a zone, push NEXT button to
advance to the next zone. Slope
for each zone can also be set in the Soil Type menu. From the
Soil Type menu, use the UP and DOWN buttons to select Slope.
Using the NEXT button select the degrees of slope (elevation
change) for each zone. Set each zone for 0 to 25 degrees of
slope based on the chart provided.
Use NEXT button to move between zones.
Note: Run/Soak period can reduce the need to
set multiple start times for purpose of preventing
runoff. Using the combination of multiple start
times and Run/Soak cycles can lead to extended
watering windows since Run/Soak cycles are applied to
each start time.
9.2.4 More/Less (optional)
When your SmartLine® controller is set
in SMART mode, the Seasonal % Adjust
in the BASIC mode is inactivated since
the automatic adjustments are made
daily rather than monthly. You can use
MORE/LESS to fine tune the run time
calculation by zone in the SmartLine® controller by –50 to +25%.
Use UP and DOWN buttons to select % adjustment. Use NEXT
and BACK buttons to move between zones.
This feature can be useful to reduce run time adjustments for
shady and partially shaded zones. The table provided may
be used for general
shade guidelines. Other
factors may result in
needing to use MORE/
LESS for fine tune
adjustments including
sprinkler efficiency, zone
efficiency, and wind.
Sprinkler efficiency varies between types of sprinklers and the
manufacturer’s design. Zone efficiency varies based on the
design layout of sprinklers in a zone, sometimes overlapping or
sometimes not. High winds can serve to dry out plant and soil to
increase the need for water. For optimum results considering the
many unique variables in each zone, users should periodically
monitor plant life health and water usage, especially aer initial
controller setup, so proper adjustments can be made.
THIS COMPLETES PROGRAMMING FOR SMART WATERING.
RETURN THE DIAL TO THE RUN POSITION.
9.2.5 Activating the SLW Series On-Site Weather Sensor:
Verify the time and date are set and
the ZIP Code or Latitude is set on the
SmartLine® Controller before proceeding
with SLW Weather Sensor activation.
On the SLW Weather Sensor, press and
hold down the Rain Sense test tab in the
center of the rain sensor for 5 seconds.
On the SmartLine® controller, verify
that the antenna icon appears on the bottom line of the LED
display. (Note: The icon will flash for 1 minute at the time of a
communication. The icon will be static between communication
events.) The antenna indicates communication has been
9.0 Programming for Smart Watering Mode
SMART
BASIC
MANUAL ZONE
MANUAL TEST
RUN
SYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
ADVANCED
MENU
ZIP CODE / LATITUDE
SPRINKLER TYPE
PLANT TYPE
SOIL TYPE
SMART
BASIC
MANUAL ZONE
MANUAL TEST
RUN
SYSTEM OFF
CURRENT TIME / DATE
PROGRAM START TIMES
ZONE RUN TIMES
DAYS TO WATER
OMIT TIMES / DAYS
SEASONAL % ADJUST
ADVANCED
MENU
ZIP CODE / LATITUDE
SPRINKLER TYPE
PLANT TYPE
SOIL TYPE
MORE / LESS
SHADE LEVEL MORE/LESS %
TOTAL SHADE -50%
FILTERED SHADE -20%
MORNING SHADE -10%
AERNOON SHADE -30%
3/4
1/4
SLW Weather Station
Rain Sense spindle
Note: Factory
default settings
are clay soil
and zero slope.