background image

2

ANGEL G7

© 2005 WDP LTD.

Warnings: Important Safety Instructions & Guidelines

WARNINGS

 WARNING

• The ANGEL is not a toy.
•  Careless or improper use, including failure to follow instructions and warnings 

within this Operator Manual and attached to the ANGEL could cause death or 

serious injury. 

• Do not remove or deface any warnings attached to the ANGEL. 
•  Paintball industry standard eye/face/ear and head protection designed 

specifically to stop paintballs and meeting ASTM standard F1776 (USA) or CE 

standard (Europe) must be worn by user and any person within range. 

• Must be at least 18 years of age to purchase the ANGEL.  
•  Persons under 18 years of age must have adult supervision when using or 

handling the ANGEL. 

• Observe all local and national laws, regulations and guidelines.
•  Use only on professional paintball fields where codes of safety are strictly 

enforced.

• Use compressed air/nitrogen gas only. Do not use CO2.
• Do not exceed 850 psi (58 bar) input pressure.
•  Always follow instructions, warnings and guidelines given with any first stage 

regulator you use with the ANGEL. 

• Use 0.68 calibre paintballs only.
• Keep the ANGEL switched off until ready to shoot. 
• Treat every marker as if it is loaded.
• Never point the ANGEL at anything you do not intend to shoot.
• Do not shoot at persons at close range.
• Do not shoot at fragile objects such as windows.
•  Always measure your markers velocity before playing paintball, using a suitable 

chronograph. 

•  Never shoot at velocities in excess of 300 feet (91.44 meters) per second, or 

at velocities greater than local or national laws allow.

•  Do not fire the ANGEL with the breech open or without the bolt in the breech, 

as high pressure gas will be emitted.

• Do not fire the ANGEL with the pull knob in the unlocked position.
•  Never look into the barrel or breech area of the ANGEL whilst the marker is 

switched on and able to fire.

•  Never put your finger or any foreign objects into the paintball feed tube of the 

ANGEL 

•  Never allow pressurised gas to come into contact with any part of your body.
• Always switch off the ANGEL when not in use.
•  Always fit a barrel blocking device to your ANGEL when not in use on the field 

of play.

•  Always remove all paintballs from the ANGEL when not in use on the field of 

play.

•  The Twisted Lock Gated Feed™ is designed to retain a number of paintballs 

in the feed tube and breech area of the ANGEL Always ensure that these 

paintballs are removed from the ANGEL when it is not in use on the field of 

play. 

•  Always remove the first stage regulator and relieve all residual gas pressure 

from the ANGEL  before disassembly.

•  The ANGEL can hold a small residual charge of gas, typically 2 shots, with the 

first stage regulator removed. Always discharge the marker in a safe direction 

to relieve this residual gas pressure.

•  Always remove first stage regulator and all residual gas pressure from the 

ANGEL for transport and storage.

•  Always follow warnings and guidelines given with your first stage regulator for 

safe transport and storage.

• Only charge the ANGEL using the charger supplied.
•  Only use 12 Volt negative earth vehicles as a power supply for the charger.
• Do not leave the ANGEL unattended whilst charging.
• Always store the ANGEL in a secure place.
•  THIS OPERATOR MANUAL MUST ALWAYS ACCOMPANY THE PRODUCT IN THE 

EVENT OF RESALE OR NEW OWNERSHIP.

•  SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE.

ADHERE STRICTLY TO THESE AND ALL OTHER SAFETY INSTRUCTIONS AND GUIDELINES

WARNINGS FOR SAFE ANGEL HANDLING

Содержание ANGEL G7





























Отзывы: