4
ANGEL G7
© 2005 WDP LTD.
OPERATION
Making the ANGEL Safe – Switching ANGEL Eyes On/Off – Propellant Air/Nitrogen Supply
MAKING THE ANGEL SAFE
• Ensure the ANGEL is switched ON. See SWITCHING ON YOUR ANGEL
- Page 3.
• Press the top button on the rear of the grip frame for 1 second until the
LED on the rear of the frame turns Red and the LCD displays ‘SAFE’.
MAKING THE ANGEL SAFE
Press and hold the top button on the rear of the grip frame for 2 seconds until
the display indicates ‘SAFE’, alternatively switch the ANGEL OFF via the isolator
switch on the rear of the ANGEL.
LED INDICATOR STATUS ON THE REAR OF THE FRAME
• NO LED = No charge present or isolator switch is OFF.
• GREEN CONSTANTLY ON = SAFE mode.
SWITCHING ANGEL EYES ON/OFF
• Ensure the ANGEL is switched ON. See SWITCHING ON YOUR ANGEL - Page
3.
• As default the Angel Eyes will always be ON whenever the ANGEL is made
LIVE.
• The Angel Eyes can only be switched off by pulling and holding the trigger in
for 2 seconds.
• In modes 2 to 5 and Demo, the Angel Eyes cannot be switched off.
• To switch the Angel Eyes back on whilst the ANGEL is LIVE you may either
switch the ANGEL OFF and ON via the isolator switch and then make the
ANGEL LIVE by pressing the top button, or alternatively make the ANGEL SAFE
then LIVE.
LED INDICATOR STATUS ON THE REAR OF THE FRAME
• RED CONSTANTLY ON = LIVE mode, ANGEL EYES OFF.
• RED SLOWLY FLASHING = LIVE mode, ANGEL EYES ON.
PROPELLANT AIR / NITROGEN SUPPLY
The ANGEL is designed to operate on air/nitrogen gas. This needs to be supplied
to the ANGEL at an ideal regulated pressure of 400 psi (27.5 BAR) using a
suitable first stage paintball regulator, such as the ANGEL A.I.R.
• THE ANGEL IS LIVE AND CAPABLE OF DISCHARGING.
WARNING
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
• THE ANGEL IS LIVE AND CAPABLE OF DISCHARGING.
WARNING
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
• Always follow the instructions, warnings and guidelines given with any first
stage regulator you use with the ANGEL.
• Use compressed air/nitrogen gas only DO NOT USE CO2.
• Only use a paintball regulator that has been designed for air or nitrogen gas.
• Do not exceed 850 psi (58bar) input pressure to the ANGEL.
• SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE.
WARNING
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
Depress top button
for 1 sec
When Angel is LIVE
pull and hold trigger
for 2 sec
Red light
will stop
blinking
when eyes
are ‘OFF’
