12
ANGEL G7
© 2005 WDP LTD.
General Care & Cleaning – General Assembly: Right Hand View
MAINTENANCE
GENERAL CARE & CLEANING
The ANGEL should only be cleaned externally using a synthetic oil moistened
cloth only. Under no circumstances should you use hydrocarbon based oils, as
these will cause irrevocable damage to the internal seals, e.g.: WD40, Vaseline,
Duck Oil, Engine oil, Plus Gas, 3in1. The suitable oil is Love Juice Oil.
The ram shaft and internal parts that are accessible during disassembly and
re-assembly should be lubricated with Love Juice Extreme Grease.
The frequency of lubrication should be every event or at least 8000 shots for oil
lubrication and 20,000 shots for grease lubrication. The ANGEL should never be
immersed into water otherwise damage may occur to the electronics.
The electronics are moisture/damp proof to IP65. Ensure correct tools are used.
IMPORTANT NOTES: For General Maintenance
• No solvents or abrasive cleaning products should be used. All external and
internal accessible moving parts should be lubricated using light synthetic
oil only.
• All threads are metric except gun accessory mountings onto the grip frame,
which is industry standard 10/32 UNF at centres 0.75 inches. The screw
thread length must not exceed 0.375 inches (10mm) into the bottom of the
frame otherwise damage will occur to the electronics. We recommend that
you remove the left-hand cheek cover and ensure the screws do not project
into the circuit board cavity when fitting.
• Ensure a barrel blocking device is fitted to the ANGEL.
• Ensure the hopper is removed from the ANGEL.
• Ensure that there are no paintballs in the ANGEL.
• Always remove the first stage regulator and relieve all residual gas pressure
from the ANGEL before disassembly.
• The ANGEL can hold a small residual charge of gas, typically 2 shots, with the
first stage regulator removed. Always discharge the marker in a safe direction
to relieve this residual gas pressure.
WARNING
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
COVER PLATE
SOLENOID
BREECH
RELEASE
LEVER
RAM
BACK PLATE
GRIP FRAME
ANGEL EYES
END PLUG
FLASH TANK
EXHAUST VALVE
MINI-REGULATOR
