10
ANGEL G7
© 2005 WDP LTD.
LCD MENUS
Figure 2: Internal Menu – Figure 3: Internal Text Programming – Figure 4: Internal PIN Programming
PIN PROGRAMMING
NOTES
SCROLL
CONFIRM DIGIT
INITIATE
PIN
TRIGGER
Programming the PIN number
can only be completed with
the trigger held in and the
ANGEL in ‘SAFE’ Mode.
CONFIRM PIN
Press Internal to enter
PIN Mode.
Press again to initiate
PIN number entry.
Press to scroll through
digits 0 to 9.
Press to confirm digit.
Repeat Steps 4 and 5 until
PIN complete.
Upon confirmation,
the LCD will display ‘SET’
Press to confirm PIN.
If PIN correct, ANGEL will enter
‘SAFE’ Unlocked Mode.
Or press to clear and return
to Step 4.
PIN SET
1
2
3
4
5
6
7
TEXT PROGRAMMING
NOTES
SCROLL
CONFIRM DIGIT
INITIATE
TEXT
TRIGGER
Text Programming can only
be completed with
the trigger held in and the
ANGEL in ‘SAFE’ Mode.
CONFIRM TEXT
Press Internal to enter
TEXT Mode.
Press again to initiate
TEXT entry.
Press to scroll through
digits 0 to 9 and A to Z.
Press to confirm digit.
Repeat Steps 4 and 5 until
TEXT complete.
Upon confirmation,
the LCD will display ‘SET’
Press to confirm TEXT.
Or press to clear and return
to Step 4.
TEXT SET
1
2
3
4
5
6
7
INTERNAL MENU
SUB MENU
DWELL
Valve Dwell
10 - 24 milliseconds
Defaults to SAFE after10 secs.
Firing disabled in SAFE or menus.
1
TRIGGER OFFSET
Range 1 - 20, the lower the
number, the lower the offset.
2
MODE
Firing Mode - only enabled if the
specification permits.
3
RESET
Resets to default
factory settings.
4
TO DWELL
1
KEY
Press Top Button
Press Middle Button
Press Bottom Button
Press BLUE Internal
Press YELLOW Internal
