57
EN
II.
Quick start
WARNING: read the instructions and safety recommendations in
this manual carefully before using the power-assisted bicycle.
Your safety and the proper functioning of your bicycle depend on
this.
Once your bike is set up, press the "ON/OFF" button (23) of the battery,
then step on it and start pedalling. After two turns of the pedal, the
power-assisted engine will start and provide you with additional driving
force. A slight humming can be heard, indicating that the engine is on.
If you stop pedalling, the engine turns off and the bike slows down, then
stops like a standard bike. Press on one of the brake levers to brake.
III.
Settings
1.
Tyres
Check tyre pressures regularly. Riding with insufficiently inflated or
overinflated tyres can adversely affect performance, cause premature
wear, reduce battery life or increase the risk of accident. If there is
significant wear or there is a visible groove on one of the tyres, replace
it before using the bicycle. The manufacturer provides a pressure range
on the side of the wheel rim and in the following table. The pressure
should be adapted to the weight of the user.
Pressure
Model
Bike size
Size of
inner tubes
Tyre size
PSI
Bar
TAKEAWAY
E-50
20“
20 x 1.75
20 x 1.75
30 - 65
2 - 4.5
2.
Brakes
Before each use, check that the front and rear brakes are in perfect
working order.
The lever on the right activates the rear brake. The lever on the left
activates the front brake.
It is recommended that you distribute your braking force approximately
60/40 between the front and rear. The brake lever should not be in
