
63899-002 Rev. A 3/20/2024
46
Toggle “+/-“ to
Parameter 050
.
Parameter 050 should begin flashing.
Press “Enter”
The screen will then display
”bAC_UP”. Press “+”
to
“
Parameter rEStore”
. The screen
will display 0.
Press “Enter”. Press
“+”
to change the 0 to a 1. The value 1
should be flashing.
Press “Enter”.
The 1 should no longer be flashing.
After a few seconds, the 1 will return
to a 0.
When the screen displays a 0 again,
the restore is complete.
G. ERROR HISTORY
The purpose of the error history is to view all previous faults and diagnostic codes. Depending on the error,
there may be secondary causes to a burner fault. Being able to view these in a separate location once the burner
is not running will allow for complete diagnostic of the burner fault.
Press “VSD” > 1
second to access
login mode. You will need to log into
the service level. See the Common
Parameters Table in SECTION III for
password.
Toggle “+/-“
to
Level 700. Press
“Enter”.
Level 700 contains all error
history.
Toggle “+/-“
to
Parameter 701
.
(Parameter 701 is the initial fault).
Parameter 701 should begin flashing.
Press “Enter”
to enter index 01. (The
LMV3 saves the last 25 faults
Parameters 701-725).
Once within index 01, it will flash. To
toggle to the next index,
Press “+”,
for previous index
Press “-“.
Содержание LC2300M
