Wayne LC2300M, Руководство пользователя, Страница: 24 / 64

63899-002 Rev. A 3/20/2024
24
NOTE: TABLE 1 IN SECTION I – INSTALLATION REFERENCES VARIOUS
SETPOINTS PRE-PROGRAMMED INTO THE AZL. FOR REPROGRAMMING
P9 TO A LESSER FIRING RATE, USE THE TABLE AS A GUIDE FOR BOTH
GAS AND AIR ACTUATOR SETTINGS FOR THE PROVIDED DURING RATES.
15. Once complete, hit “Esc” (“+” and “-” simultaneously) until “400: Set” reappears. At this
point P9 – high fire has been reprogrammed. Startup can be continued as normal. Proceed
to Step 16.
16. Upon successfully entering the OEM Password the screen will briefly display “PArA” and
settle on “400: Set”. With “400: Set” on the display, press “Enter”. “run” will appear. Press
the “Enter” key again to begin setup cycle.
17.
Upon pressing “Enter”, the AZL screen will cycle thru the following steps:
Ph 12:
Burner standby
Ph 22:
Burner, Safety Valve, and Fan
On