background image

The 

Option-Specific Installation Instructions

 and a more detailed 

Installation Instructions And Owner’s Manual

 are available at no charge 

from:
- Your local Wayne Dalton Sales Center, or
- Online at 

www.Wayne-Dalton.com

, or

- By mailing to: Wayne Dalton, a division of Overhead Door Corporation, P.O. Box 

67, Mt. Hope, OH., 44660

©Copyright 2017

REV5_02/22/2017

Part Number

T a b l e   O f   C o n t e n t s

359498

PLEASE DO NOT RETURN THIS PRODUCT 

TO THE STORE

If you need assistance, please call 1-866-
569-3799 (press Option 1) and follow the 
prompts to contact a customer service 
representative. They will be happy to handle 
any questions that you may have.

AFTER INSTALLATION IS COMPLETE, 
LEAVE THIS QUICK START GUIDE /
OWNER’S MANUAL WITH THE 
HOMEOWNER, OR FASTEN IT NEAR 
GARAGE DOOR FOR EASY REFERENCE.

Pre-Installation 2

Important Safety Instructions 

2

Removing an Existing Door and Preparing the Opening 

2

Tools Required 

2

Breakdown of Door and Track Parts 

3

Breakdown of Counterbalance Parts 

4

Door Installation Instructions 

5

Counterbalance Installation Instructions 

10

TorqueMaster

®

 Spring 

10

Torsion Spring 

14

Extension Spring 

17

Maintenance 19

Cleaning Your Garage Door 

19

Painting Your Garage Door 

19

Maintaining The Finish On Your Garage Door 

19

Operation And Maintenance 

19

Warranty 20

Wayne Dalton, a division of Overhead Door Corporation

Models 9100, 9405, 

9600, 5120, 5145, 

9700, 9510 and 9800

R

e s i d e n t i a l

  d

o o R s

Q

uick

 S

tart

 G

uide

 / O

wner

S

 M

anual

s

tandaRd

 l

ift

This 

Quick Start Guide / Owner’s Manual

 provides basic instructions 

for the installation of 

standard-package

 garage doors with a maximum 

door height of 8 feet only. Option-Specific Installation Instructions are 
available for doors over 8 feet tall, or purchased with any of the following 
options:
Step Plate, Riveted Track, Angle Mount Track, Low Headroom, High Lift, 
Full Vertical Lift, Roof Pitch, 32” Radius Track, Solid Shaft, Keyed Shafts, 
Center Coupler Assembly or any other option not included herein.
To avoid possible injury or damage, read and fully understand these 
instructions and any applicable Option-Specific Instructions carefully 
before installing and operating the garage door. Pay close attention to all 
warnings and notes.

QUICK START GUIDE IMPORTANT NOTICES!

Содержание 9100























Отзывы: