18
INTELLIZONE2 INSTALLATION MANUAL
IntelliZone2 Confi guration cont.
Abbreviation
Definition
bed
bedroom
dinrm
dining room
gbed
guest bedroom
ils
in-law suite
grge
garage
kit
kitchen
liv
living
mbed
master bedroom
famrm
family room
stry
story
upstrs
upstairs
sunrm
sun room
bsmnt
basement
lowlv
lower level
thrm
theater room
exrm
exercise room
grtrm
great room
recrm
recreation room
bonrm
bonus room
off
office
The IntelliZone2 allows the selection of either comfort
or economy mode in each individual zone to provide
maximum savings in areas that allow it (such as workshops
and basements), while maintaining perfect comfort in the
zones where accurate temperature is most desired (such as
family room, bedrooms and baths).
Zone Priority
Comfort Mode
- A single zone call (Y1) for conditioning
will engage the compressor and allow a minimal set point
variation, thus providing ultimate comfort.
Economy Mode
- A single zone call (Y1) for conditioning
will be ignored by the IntelliZone2 until either a Y2 call
is initiated from the same zone or another zone calls for
conditioning (Y1). This allows a slightly greater set point
variation than in comfort mode. This setting prevents
less important zones from energizing the compressor
unless it is really needed, thus saving money. As a bonus
in this mode, upon a Y1 call, the IntelliZone2 may try to
precondition the zone with return air from other zones
already satisfied and, in some cases, can preclude the need
for energizing the compressor.
Zone Naming using MasterStat
Press and hold the “Zone” button in the upper right hand
corner to be able to name the zones. There is limited
character size available for the naming. “Z” and the zone
number (Z1-Z6) will always be displayed in front of the
zone name. Below are some recommended abbreviations.
Zone names will only be displayed on the MasterStat.
Naming Zones Using Symphony
The zone names on the Symphony Dashboard and app
can be added/changed using Symphony. When using
Symphony to name the zones it does not populate or
change the names shown on the MasterStat. To add
zone names log into your Symphony Dashboard, click
on “Account” at the top of the dashboard. Click on “Edit
Device”. The number of zones that the IntelliZone2 is
configured for will be shown. Click on the zone and input
the desired zone name. Repeat this for all the zones. Once
completed click “Save Device”
Jane Doe
Zones can also be named using the mobile Symphony app. Go
to the Symphony app. Select the three dots " " in the upper
right-hand corner. Select “Edit Friendly Name”, input the zone
name and select save. To name the next zone select the next
zone by swiping right to left. Repeat this process for all the
zones.
By naming the thermostat you can use Alexa to make changes
to the thermostats. For more information on Alexa refer to the
WaterFurnace Symphony for Alexa user guide.
…
