Warmhaus EWA 2525C, Инструкция по установке и обслуживанию

Страница: 32 / 68

32
warmhaus.co.uk
SET Transparent Parameters Menu (TSP)
Designation:
Ewa wall-hung boilers
Object Type-model / Technical data
Procedure setting or checking TsP parameters Ewa Combi Boiler
Pos No Operation Description GB
0
Attention: This procedure must be applied by authorised persons and valid for only condensing boiler.
Attention:
document suppiled by Warmhaus R&D.
1
"To enter to TSP menu:
Push two button ""CH"" + RESET simultaneously"
2 Wait until the approval circle complete on the LCD and release buttons
3
Attention:
Do not change this parameter
4 From this moment toggle ( + ) to increase or ( -) to decrease any parameter aimed to be changed.
5
Ones you reach the parameter aimed to be changed, on the screen press the "DHW" button to be able to
change the parameter value.
6 Wait until the approval circle complete on the LCD and release buttons.
7
Now you are able to change the parameter. Toggle ( + ) to increase or ( -) to decrease to SET
PARAMETER VALUE
8 Ones you reach desired value PXX = Y press the DHW button for circle time to save the value.
9 Wait until the approval circle complete on the LCD and release buttons.
10 At this point onthe screen shows; for example = TsP – P02 – 0
11 ıf you want to change the another parameters repeat the steps 4-5-6-7-8
12
It is possible to exit from TSP menu pressing "CH" +"RESET" button for circle time. Automatic exit is
executed with no action in 5minutes.
13 Wait until the approval circle complete on the LCD and release buttons. In this way EXIT the TsP Menu.
14
Attention: If parameter P14 set as 5 for Au-To calibration, if the electricity cut OFF / ON - OR wait longer
time than 3 Minute the P14 will be reset automatically to =0 so please make calibration just after exit of TsP
4. COMMISSIONING
4.1. Display Function
4.1.1. SET Transparent Parameters Menu (TSP)