Wallenstein BXMT Series, Руководство оператора

Страница: 21 / 48

5.3 Discharge Chute
01033
Fig. 13 – Discharge Chute Rotation
• The discharge chute can rotate 360°. A spring-loaded latch
handle locks it in position when released.
• Lift the latch handle up until the chute lock pin disengages,
rotate the chute as required, and release the latch handle.
Make sure it locks it in position at the next nearest lock
point.
5.4 Hood Deflector
01034
Fig. 14 – Hood Deflector
• The Hood Deflector on the end of discharge chute directs
the discharge of chips.
• The deflector is held in position by clamping knobs on each
side. To reposition, turn the knobs counterclockwise to
loosen. Reposition, then tighten the clamps.
5.5 Jack Stand
01085
Fig. 15 –
Jack Stand
• The jack stand is used to support the front of the chipper
when disconnected from the tow vehicle or in storage.
When towing the chipper, raise the jack stand leg and place
the snap lock pin in the lower hole.
BXMT3209
Trailer Chipper-Shredder
Controls
21