Wallenstein BXMT Series, Руководство оператора

Страница: 27 / 48

00187
Fig. 25 – Ignition Switch
Under normal conditions, use the following procedure
1. Stop loading material into the chipper.
2. Decrease engine speed to MIN.
3. Turn the ignition switch OFF.
6.7 Chipping Operation
WARNING!
Never reach into the feed hopper. Doing so risks
hands getting caught. Use a stick or branch to
push in any material that does not move on its
own.
If jammed, stop the engine, wait for the rotor to
stop, then clear the jam.
W004
CAUTION!
Risk of personal injury! Do not overload the
machine by placing material into the feed hopper
larger than the size stated on the decal.
Machine damage could also result.
W063
Maximum Material Diameter for BXMT3209
Chipper Shredder
3" (7.5 cm) 1" (2.5 cm)
1. Before putting material into the chipper, make sure the
engine is warmed and the rotor is up to speed.
2. Slowly slide material into the chipper feed hopper. Do not
force the material as it is drawn in as it engages the rotor.
Use continuous, light pressure to guide it in.
3. Be aware of how much material you feed in. Slow down or
stop if the engine begins to slow.
01087
Fig. 26 – Chipper Operation
4. Use a stick or branch to push any piece of material into the
rotor that does not move on its own.
Never reach in past
the safety curtain. If a jam results, stop the engine, wait for
the rotor to stop, then clear the jam.
01037
Fig. 27 – Feed Hopper Safety Curtain
5. Make sure the wood chip pile is contained and does not
affect the immediate work area.
BXMT3209
Trailer Chipper-Shredder
Operating Instructions
27