Wallenstein BXMT Series, Руководство оператора

Страница: 26 / 48

00188
1
2 3
Fig. 20 – Choke Lever
1. Choke Lever
2. Choke OPEN—warm engine
3. Choke CLOSED—cold engine
3. Move the throttle lever away from the MIN. position, about
1/3 of the way toward the MAX position.
00191
1
Fig. 21 – Engine Throttle
1. Throttle Lever
4. Turn the engine ignition switch ON.
00187
Fig. 22 – Ignition Switch
5. Pull the starter grip out lightly until resistance is felt, then
pull briskly in the direction of the arrow as shown below.
Return the starter grip gently.
00192
Fig. 23 – Recoil Starter
IMPORTANT! Do not allow the starter grip to snap back
against the engine. Return it gently to prevent damage to the
starter.
6. Leave the engine operating at low throttle for a few minutes
to allow it to warm up. Gradually push the choke control
lever open (to the left) as the engine warms.
IMPORTANT! Engine should be warmed up before putting to
work.
7. Once the engine is warmed, increase the throttle setting to
MAX to increase the rotor to full speed before beginning.
01090
Fig. 24 – Move throttle setting to MAX
6.6 Stopping the Engine
To stop the engine in an emergency, turn the ignition switch OFF.
Correct fault situation before restarting.
Operating Instructions
BXMT3209
Trailer Chipper-Shredder
26