Wallenstein BXMT Series, Руководство оператора

Страница: 15 / 48

Safety Awareness
Caution! Refer to the operator's manual. Read ALL operating
instructions in the manual and learn the meaning of ALL
safety signs on the machine.
The best safety feature is an informed operator!
8
Discharge Chute
CAUTION! Risk of injury from flying debris!
Stay clear of material discharge chute. Machine can expel
wood chips fast enough to cause injury.
Do not point discharge at people, animals or buildings. Point
chipper discharge away from work area and bystanders. Keep
a safe distance from discharge.
9
3.3 Replacing Damaged Safety Signs
• Always replace safety signs that are missing or have
become illegible. Replacement safety signs are available
from your authorized distributor, dealer parts department,
or the factory.
• Always keep safety signs clean and legible.
• Parts replaced that had a safety decal on them must also
have the safety sign replaced.
Procedure
Installation area must be clean and dry. Make sure the surface is
free of grease or oil. Ambient temperature must be above 50 °F
(10 °C).
NOTE: Determine exact position before removing the
backing paper on the decal.
1. Peel the decal off the backing sheet.
2. Align the decal with an edge on the machine if possible.
3. Starting on one edge, carefully press the center of the
exposed sticky backing in place, smoothing it out as you
work from one side to the other.
4. Use a squeegee, credit card or similar edge to smooth it
out. Work from one end of the decal to the other end.
Small air pockets can be pierced with a pin and smoothed out
using the piece of sign backing paper.
BXMT3209
Trailer Chipper-Shredder
Safety
15
Safety Signs