manualshive.com logo in svg

Waitzinger THP 94/42 R 4 XXT, Руководство пользователя

Поделиться
Скачать
Waitzinger THP 94/42 R 4 XXT Скачать руководство пользователя страница 77

S

TARTING

 

UP

 

AND

 

OPERATING

C

HAPTER

 7

THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT

GB-07.2005

7-7

DANGER

WARNING

墌

The operator must continuously monitor the hazard area.

墌

The outrigger slew in/out and  extension areas must be kept clear of all persons and objects.

墌

All instructions set out in Chapter 2 “Safety instructions” must be strictly complied with.

7.3.1

Stability checking

If the option “Stability checking” is installed, refer to the separate user manual.

7.3.2

Extending / retracting the outriggers

DANGER:

墌

For safety reasons the operator must always face towards the outrigger
that is being extended / retracted and have an unimpeded view of the
entire hazard area!

墌

When activating the functions with the respective operating lever, for
safety reasons the other hand should always be keeping the safety
button (Item 3, Fig. 5.5 / Item 1, Fig. 5.6) pressed!

•

Moving the operating lever on the outrigger control block 

downwards

, means for all functions “

Extend

“.

•

Moving the operating lever on the outrigger control block 

upwards

, means for all functions “

Retract

“.

•

The functions “Slew out” and “Telescopic extension” can be performed concurrently for the front outriggers.
This causes the front outriggers to extend automatically to their full extent.

•

The outriggers are secured in the stowed position for vehicle travel by hydraulically locked catches.

WARNING:

Before moving the vehicle and before starting work make absolutely sure
that the hydraulically locked catches are engaged!

Содержание THP 94/42 R 4 XXT




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды