Waitzinger THP 94/42 R 4 XXT Скачать руководство пользователя страница 113

Страница: 113 / 155

AINTENANCE

& I

NSPECTION

HAPTER

9-3

THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT

GB-07.2005

9.2.2

Sealing rings (containing fluorine)

WARNING:

墌

Always wear protective clothing when removing the
remains of sealing rings.

墌

Fluorine is contained in Viton sealing rings, O-rings and
flat gaskets.

墌

Under normal conditions of use, Viton seals and O-rings
are safe to use. However at temperatures in excess of 400

C they decompose, e.g. if equipment catches fire.

墌

The remains of such seals are then extremely aggressive
and generally cannot be removed from the skin.

9.2.3

Oils and greases

WARNING:

墌

Allergic reactions can arise when handling oils and greases.

墌

Use barrier creams and avoid all contact with the skin.

墌

Never wash your hands in oil.

墌

Hydraulic oil emerging at high pressure can penetrate the
skin and cause severe injuries.

墌

To avoid severe infections, call a doctor immediately.

墌

Dispose of oils and filters in accordance with statutory
regulations.

墌

Never pour lubricating oil down the public drains.

WARNING

Содержание THP 94/42 R 4 XXT




























































































































































Результаты поиска

Содержание THP 94/42 R 4 XXT

Отзывы:

Бренды по названию

Популярные бренды

Waitzinger THP 94/42 R 4 XXT, Руководство пользователя

Результаты поиска

Содержание THP 94/42 R 4 XXT

Отзывы:

Бренды по названию

Популярные бренды