manualshive.com logo in svg

Waitzinger THP 94/42 R 4 XXT, Руководство пользователя

Поделиться
Скачать
Waitzinger THP 94/42 R 4 XXT Скачать руководство пользователя страница 71

S

TARTING

 

UP

 

AND

 

OPERATING

C

HAPTER

 7

THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT

GB-07.2005

7-1

7.

Starting up and operating

This chapter contains all the important information for the operator to safety start up and operate the truck-
mounted concrete pump.

WARNING:

Before first starting up the truck-mounted concrete pump, the operator
must carefully read through this Chapter 7 “Starting up and operating”
and perform all checks in accordance with the information set out in this
chapter. Only when the operating safety has been assured in this way
may the truck-mounted concrete pump be started up.

NOTE:

During start-up and operation, comply with the safety instructions set
out in Chapter 2!

a.

Personal safety equipment

In the entire working area of the truck-mounted concrete
pump, suitable safety equipment should be worn,
particularly when handling mortar additives.

The symbols for the necessary safety equipment are shown
in the graphics panel alongside.

The symbols shown are as follows:

1.

Hard hat

2.

Safety boots

3.

Ear defenders

4.

Safety gloves

5.

Safety glasses

6.

Face mask

7.

Protective clothing

8.

Safety harness

WARNING

Fig. 7.1   Symbols for personal safety equipment

1

2

3

4

5

7

8

6

Содержание THP 94/42 R 4 XXT




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды