manualshive.com logo in svg

Waitzinger THP 94/42 R 4 XXT, Руководство пользователя

Поделиться
Скачать
Waitzinger THP 94/42 R 4 XXT Скачать руководство пользователя страница 146

M

AINTENANCE

 & I

NSPECTION

C

HAPTER

 9

9-36

THP 94/42 R 4 XXT

THP 125/42 R 4 XXT

THP 140 H/42 R 4 XXT

GB-07.2005

DANGER

DANGER

9.12

Checking the hoses

DANGER:

If a hose splits suddenly under pressure, personnel can be seriously
injured!
WAITZINGER takes no responsibility for damages that result from the use
of worn or defective components.

Regular checking of hoses is part of the technical safety checks to be performed on the machine.

Do not repair damaged hydraulic or conveying pipes; instead replace them immediately. Damaged or weeping
hydraulic hoses must also be replaced immediately.

All hydraulic hoses must be renewed after a life of 6 years (including a shelf life of 2 years), even if they exhibit no
evident damage. The period of time can be calculated from the identification mark on the connection fitting (date
of manufacture of the hose).

9.13

Cleaning the machine

•

If the truck-mounted concrete pump is to be moved to another location for cleaning, move all parts of the
machine to their transport positions.

•

The truck-mounted concrete pump must not be driven with the distributor boom deployed or the outriggers
extended, even for short distances.

DANGER:

墌

No highly flammable materials (e.g. petrol) may be used
for cleaning!

墌

Never direct a water jet or steam jet towards electrical
components, this can occasion a flashover with fatal
consequences!

•

Protect electrical components by covering them or sealing them shut to prevent ingress of water. After completion
of cleaning, remove the covers and seals, leaving no residues.

•

Never use seawater or other saline water for cleaning.

•

Never use compressed air for cleaning.

Содержание THP 94/42 R 4 XXT




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды