manualshive.com logo in svg

Waitzinger THP 94/42 R 4 XXT, Руководство пользователя

Поделиться
Скачать
Waitzinger THP 94/42 R 4 XXT Скачать руководство пользователя страница 31

THP 94/42 R 4 XXT
THP 125/42 R 4 XXT
THP 140 H/42 R 4 XXT

GB-07.2005

S

AFETY

 

INSTRUCTIONS

 

AND

 

INFORMATION

C

HAPTER

 2

2-21

2.14

Storms and thunderstorms

墌

 From wind force 7 (wind speed 50 km/h ), stop work and move the distributor boom to the transport position.

墌

 During thunderstorms there is a risk of lightning strikes.

2.15

Noise emission measurement

The noise emission measurement to EN/ISO 3744 and EN/ISO 4871 have yielded a value of L

Aeq

 = 81.4 dB(A).

2.16

Environmental protection

墌

Use should be found around the building site for surplus concrete, or it should be disposed of as building
waste according to the statutory requirements.

墌

Consumables such as lubricants, cleaning materials during maintenance, repair and oil change should be
collected in suitable containers and disposed of in accordance with regulations (to EC directive 75/439/EWG
and statutory instruments under §§ 5a, 5b AbfG and Altöl).

2.17

First aid

墌

Information should be sought for treatment of injuries that may arise when working with the truck-mounted
concrete pump.

墌

 Injuries must be reported to the supervisor.

Содержание THP 94/42 R 4 XXT




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды