10
VM 5000
OPERATING MANUAL
EDITION 07/2014
ORDER NUMBER DOC 2344501
4
GENERAL SAFETY INSTRUCTIONS
4.1
SAFETY INSTRUCTIONS FOR THE OPERATOR
4.1.1
ELECTRICAL EQUIPMENT
4.1.2
STAFF QUALIFICATIONS
Keep this operating manual at hand near the device at all times.
Always follow local regulations concerning occupational safety and accident prevention.
Electrical devices and equipment
To be provided in accordance with the local safety requirements with regard to the
operating mode and ambient infl uences.
May only be maintained by skilled electricians or under their supervision.
Must be operated in accordance with the safety regulations and electrotechnical regulations.
Must be repaired immediately in the event of problems.
Must be decommissioned if they pose a hazard.
Must be de-energized before work is commenced on active parts. Inform staff about
planned work. Observe electrical safety regulations.
Control units
Place the control unit outside the spray booth / spray zone.
If possible, place the control unit outside the explosion zone (placement in Ex Zone 2 is
permissible).
Protect the control unit from extreme temperature and moisture changes.
Protect the control unit from contamination.
Lay and fi x the connecting cable correctly.
Ensure that the local mains voltage and tension of the device match.
Ensure that the device is operated and repaired only by trained persons.
