62
62
Tag4
(cont.)
A-NTAA SW
(analog input only)
The Advanced No Touch Auto Adjust function is able to recognize new signals
even when neither the resolution nor the refresh rate has changed. If several
PCs are connected to the monitor, and each transmit very similar (or even the
same) signals in terms of resolution and refresh rates, the monitor recognizes
there is a new signal and automatically optimizes the picture without the need
for any action on your part.
O
FF
: A-NTAA is disabled.
O
N
: If a change in signal is detected, A-NTAA will adjust the monitor to the
optimal settings for the new signal. If no change in the signal is detected then
A-NTAA does not activate. The screen will be blank while the monitor
optimizes the signal.
O
PTION
: Functions the same as O
N
, except that the screen does not go blank
when the monitor makes adjustments for changes in signal, allowing the
monitor to display the new signal faster. When using an external switching
device to connect 2 or more PCs to the monitor, using the O
N
or O
PTION
settings is suitable.
A
UTO
C
ONTRAST
(analog input only)
Adjusts the image displayed for non-standard video inputs. Press S
ELECT
to
adjust. Any adjustment requires the image to have white portions.
C
ONTRAST
Adjusts the image brightness and contrast in relation to the background.
A
UTO
B
LACK
L
EVEL
(analog input only)
Automatically adjusts the black level. Any adjustment requires the image to
have black portions. Press S
ELECT
to activate A
UTO
A
DJUST
.
B
LACK
LEVEL
(analog input only)
Adjusts the RGB black level by input signal level.
Tag5
H.P
OSITION
Controls Horizontal Image Position within the display area of the LCD.
V.P
OSITION
Controls Vertical Image Position within the display area of the LCD.
H.S
IZE
(analog input only)
Adjusts the horizontal size of the screen.
If the A
UTO
A
DJUST
function does not give you a satisfactory picture setting, a
further tuning can be performed using the H.S
IZE
(V.S
IZE
) function (dot clock).
For this a moiré test pattern may be used. This function may alter the width of
the picture. Use left/Right Menu to center the image on the screen. The image
should be homogeneous.
F
INE
(analog input only)
Improve focus, clarity and image stability by increasing or decreasing this
setting. If the A
UTO
A
DJUST
function and the H.S
IZE
function do not give you a
satisfactory picture setting, a fine tuning can be performed using the F
INE
function. For this a moiré test pattern may be used. The image should be
homogeneous.
A
UTO
F
INE
(analog input only)
This function automatically and periodically adjusts the F
INE
setting for change
in signal condition. This function adjusts approximately every 33 minutes.
H.R
ESOLUTION
Adjusts the horizontal size by increasing or decreasing the setting. Press the
right button to expand the width of the image on the screen. Press the left
button to narrow the width of the image on the screen.
