manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора, Страница: 73 / 298

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 73

OM ET18/20/24 us 1.3 * et18_20_24i400.fm 

4-23

4

Protective Front Guard structure with integrated FOPS/level I 
respectively (option)

DANGER

Piercing/penetration hazard by objects from the front or 
above!

Causes severe injury or death.

►

A protective Front Guard structure with integrated FOPS must 
be installed in areas with hazard from the front (for example 
pipes, tree trunks etc.) and of falling objects.

►

Machine operation is prohibited without a protective Front 
Guard structure with an integrated FOPS.

Information

The protective FOPS structure corresponds to level I according 
to ISO 3449:1998

►

The machine owner must ensure that the hazard situation is 
evaluated and that the national regulations are observed.

►

The machine owner must ensure that only work is performed 
that does not require any higher protection.

►

Accidents cannot be fully avoided despite equipping a 
machine with protective structures.

Assembly

1. Stop and park the machine. Stop the engine. See “Preparing 

lubrication”.

2. Remove all mirrors (option).

3. A minimum 2 persons are required for installing/removing.

4. Install the lock nuts and screws on either side.

5. Mounting point for protective structure: 

A 

(upper)

/C 

(lower).

Fig. 94:

Front Guard with integrated FOPS 
(symbolic representation)

Fig. 95:

Upper mounting point

A

E

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов