manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 256

9-38

OM ET18/20/24 us 1.3 * et18_20_24t900.fm

 

9

Safety instructions – stability table

The values of the stability table apply to lifting gear applications.

DANGER

Crushing hazard due to tipping over of the machine.

Causes severe crushing or injury resulting in death.

►

The authorized lift capacity specified in the stability table must 
never be exceeded.

►

Get informed on the lift capacity of the attachment before 
using it.

►

If an attachment with load hook or joint rod is installed, the 
weight of the attachment must be subtracted from the lift 
capacity specified in the table.

►

Use the machine for lifting gear applications only if the 
mandatory lifting gear (load hook, for example) and safety 
equipment (optical and acoustic warning devices (safe load 
indicator), stability table, hose burst valve, for example) is 
installed, functional and enabled.

►

Do not tilt the upper carriage (Vertical Digging System option).

►

Do not retract the telescopic travel gear (option). 

►

Observe chapter 

Safety/Safety instructions regarding 

lifting gear applications

.

Notice

If the specified lift capacity is exceeded, possible damage to 
property due to tipping over of the machine.

►

The authorized lift capacity specified in the stability table must 
never be exceeded.

Information

The indications are only approximate values. Attachments, 
uneven ground and soft or bad ground conditions affect lift 
capacity. The operator must take these influences into account.

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды