manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 70

4-20

OM ET18/20/24 us 1.3 * et18_20_24i400.fm

 

4

Protective structures

Protective structures are additional elements that protect the operator 
against hazard. These elements can be installed later on or as standard 
equipment.

DANGER

Accident hazard due to modified cab and protective 
structures!

Causes severe injury or death.

►

No drilling, cutting or grinding.

►

Do not install any brackets.

►

No welding, straightening or bending.

►

Replace the complete protective structure if it is damaged, 
deformed or cracked.

►

Contact a Wacker Neuson service center in case of doubt.

►

Retrofit and repair work may only be performed by a Wacker 
Neuson service center.

Information

Machine operation is only allowed with a correctly installed and 
intact cab or correctly installed and intact canopy.

For additional protection, only use correctly installed and intact 
Wacker Neuson protective structures that have been released 
for the machine.

Information

Only a Wacker Neuson service center may install the protective 
structures for the first time.

Responsibility for machine equipped with protective structures

The decision regarding the necessary protective structures (type and level 
I or II) must be made by the machine owner and depends on the specific 
operating situation.

The machine owner must observe the national regulations and he must 
inform the operator on the protective structure to be used in a specific 
operating situation.

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды