manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора, Страница: 108 / 298

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 108

5-14

OM ET18/20/24 us 1.3 * et18_20_24b510.fm

 

5

Travel levers/travel pedals

CAUTION

Accident hazard! The machine moves in the opposite 
direction if the upper carriage is rotated by 180° and the 
travel levers/travel pedals are actuated.

Injury hazard due to operating error of machine.

►

Slowly and carefully actuate the pedals and control levers.

Notice

In order to avoid excessive track abrasion: 

►

Ensure that both tracks move as you change direction.

The stabilizer blade side is the front side.

Raise the standard bucket/attchment and the stabilizer blade.

Both the travel levers and the travel pedals can be used for traveling.

The travel speed depends on the position of the travel levers or travel 
pedals.

The rear part of the travel pedals can be folded forward to save space.

Fig. 137: Travel pedals/travel levers

1

2

3

4

1

2

3

4

Position

Function

1
2

Move forward
Move forward

Machine moves forward

3
4

Move backward
Move backward

Machine moves backward

3
2

Move backward
Move forward

Machine turns to the left

1
4

Move forward
Move backward

Machine turns to the right

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов