Wacker Neuson ET18 Скачать руководство пользователя страница 46

Страница: 46 / 298

3-18

OM ET18/20/24 us 1.3 * et18_20_24e300.fm

Meaning

Indicates the interval at a which lubrication point must be lubricated.

Lubrication points/grease nipples marked green mean: lubrication every
50 hours or once a week.

Lubrication points/grease nipples marked blue mean: lubrication every 10
hours or daily.

Position

On the upper carriage on the right in traveling direction.

Meaning (option)

Indicates the lubrication points of the VDS tilt console.

Position

Upper part of front window.

Meaning

Reflector at the rear.

Position

On either side of the machine at the rear.

Meaning

This label indicates the position in which the control levers are locked.

Position

Canopy: on the left and right-hand control lever bases.

Cab: on the left-hand control lever base (standard) and on the right-hand
control lever base (option).

Meaning

Fuses and relays.

Position

Behind the left-hand side cover, outside on the cover.

Fig. 35:

Lubrication point

Fig. 36:

VDS maintenance plan

Fig. 37:

Reflector

Fig. 38:

Lock

Fig. 39:

Fuse box

Содержание ET18











































































































































































































































































































Результаты поиска

Содержание ET18

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET18, Руководство оператора

Результаты поиска

Содержание ET18

Отзывы:

Бренды по названию

Популярные бренды