Wacker Neuson ET18 Скачать руководство пользователя страница 138

Страница: 138 / 298

5-44

OM ET18/20/24 us 1.3 * et18_20_24b510.fm

5.11 Work operation

Inadmissible work procedures

Working with swivel force

•

Do not use the swivel force of the upper carriage to tear down walls or
to create level surfaces.

•

Never ram the attachment into the ground when swiveling the upper
carriage.

➥

This can damage the machine or the attachment.

Working with travel force

•

Never ram the attachment into the ground to dig when traveling.

➥

This can damage the machine or the attachment.

Retracting the attachment

•

When retracting the attachment, ensure that it does not touch the
stabilizer blade.

Avoid impact during operation to avoid damage to the excavator
bucket and machine components.

•

Do not suddenly drop the bucket to increase penetration, break
material, or compact material.

➥

Working this way can greatly reduce the machine’s service life.

Fig. 190: Working with swivel force

Fig. 191: Working with travel force

Fig. 192: Retracting the attachment

Fig. 193: Working with the falling force

Содержание ET18











































































































































































































































































































Результаты поиска

Содержание ET18

Отзывы:

Похожие инструкции для ET18

Бренды по названию

Популярные бренды

Wacker Neuson ET18, Руководство оператора

Результаты поиска

Содержание ET18

Отзывы:

Похожие инструкции для ET18

Бренды по названию

Популярные бренды