manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 41

OM ET18/20/24 us 1.3 * et18_20_24e300.fm 

3-13

3

Meaning

Hand crushing hazard.

1. Always use the handles to open and close the front window.

2. Always lock the front window with both locks.

Position

On the front window.

Meaning

Accumulator is under high pressure. Always read the Operator’s Manual 
before performing maintenance or repairs.

Position

Under the rear part of the machine, on the right (in traveling direction) 
behind the engine oil sump.

Meaning (option)

This label indicates the emergency exit on machines equipped with the 
Front Guard option.

Position

On the upper edge of the rear window in the cab.

Meaning (option)

If the specified load/stability is exceeded, there is a hazard of serious 
crushing causing serious injuries and even death.

Possible serious damage to the machine.

Position

On the headliner.

Fig. 20:

Front window

Fig. 21:

Pressure accumulator

Fig. 22:

Emergency exit

Fig. 23:

Stability

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды