manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 124

5-30

OM ET18/20/24 us 1.3 * et18_20_24b510.fm

 

5

Lifting gear applications

DANGER

Crushing hazard due to tipping over of machine.

Causes severe crushing or injury resulting in death.

►

Observe chapter 

Safety/Safety instructions regarding 

lifting gear applications

.

►

The authorized lift capacity specified in the stability table must 
never be exceeded.

►

If a bucket or attachment (hammer, etc.) is installed, the 
weight of the attachment must be subtracted from the lift 
capacity specified in the table.

►

Use the machine for lifting gear applications only if the 
mandatory lifting gear (load hook, for example) and safety 
equipment (optical and acoustic warning devices (safe load 
indicator), stability table, hydraulic hose burst valve, for 
example) is installed, functional and enabled.

►

Functional check of safe load indicator (see chapter “Safe 
load indicator”).

►

Do not tilt the upper carriage (Vertical Digging System option).

►

The telescopic travel gear must be extended (option).

Notice

If the specified lift capacity is exceeded, possible damage to 
property due to tipping over of the machine.

►

The authorized lift capacity specified in the stability table must 
never be exceeded.

In lifting gear applications, always switch on switch 

38

 for the safe load 

indicator.

As soon as indicator light 

32

 illuminates and the warning sounds:

•

Reduce the load until the indicator light goes out and the warning no 
longer sounds.

Suitable equipment for fastening and securing loads must be available.

Fig. 167: Safe load indicator

38

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды