manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора, Страница: 229 / 298

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 229

OM ET18/20/24 us 1.3 * et18_20_24t900.fm 

9-11

9

The harmonized data comply with measurements made by international 
institutes, organizations and manufacturers. This publication offers 
information on the calculation of whole-body vibrations for operators of 
earth moving machines. This method is based on vibration measurements 
under real operating conditions for all machines. Read the original 
guidelines. This chapter summarizes part of the legal regulations. 
However, its aim is not to replace the original references. Other parts of 
this document are based on information of the United Kingdom Health and 
Safety Executive.

For more information on vibration, refer to Directive 2002/44/EC of 
European Parliament and Coucil on minimum health and safety 
requirements regarding exposure of workers to risks arising from physical 
agents (vibration).

Your Wacker Neuson dealer provides information on other machine 
functions reducing vibration and on safe operation.

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов