manualshive.com logo in svg

Wacker Neuson ET18, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET18 Скачать руководство пользователя страница 117

OM ET18/20/24 us 1.3 * et18_20_24b510.fm 

5-23

5

Hammer operation (option)

Information regarding hammer operation

Use the canopy version only with a shatter protection during hammer 
operation.

– see chapter “ Shatter protection (option)” on page 4-25

WARNING

Piercing/penetration hazard due to flying objects!

Causes severe injury or death.

►

During operation, all persons must stay clear of the work area 
of the machine.

►

Do not place the machine directly underneath the workplace 
during demolition, otherwise debris can fall onto the machine 
or the building can collapse.

►

All windows and doors must be closed if the machine is 
equipped with a cab (option).

WARNING

Accident hazard due to tipping over of the machine!

Can cause severe injury or death.

►

During operation, all persons must stay clear of the work area 
of the machine.

►

Do not perform any demolition work under the machine. This 
could cause the machine to tip over.

►

The machine can lose its balance and tip over if a hammer or 
other heavy attachment is used. Proceed as follows to 
perform machine operation both on level ground and on 
slopes:

►

Never turn, lower or set down the attachment abruptly.

►

Do not extend or retract the boom abruptly.

►

Do not use the impact force of the attachment to perform 
demolition work. Broken or falling debris can cause injuries, 
damage to property or damage to the equipment.

►

Machine travel is prohibited during hammer operation.

Содержание ET18











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды