Wacker Neuson E13-01 Скачать руководство пользователя страница 96

Страница: 96 / 252

5-6

BA EZ17 en* 1.1 * ez17b500.fm

5 Operation

Uphill machine operation

• Raise the boom 20 – 30 cm (8 – 12 in) off the ground and position it

straight ahead at the center of the machine.

• Do not perform machine travel on slopes steeper than 15°.
• Do not perform machine travel on slopes with a lateral angle of incli-

nation over 10°.

Downhill machine operation

• Raise the boom 20 – 30 cm (8 – 12 in) off the ground and position it

straight ahead at the center of the machine.

• In order to minimize the risk of tipping over, adapt the travel speed to

the circumstances.

• Do not perform machine travel on slopes steeper than 15°.
• Do not perform machine travel on slopes with a lateral angle of incli-

nation over 10°.

On lateral inclinations over 10°, pile up material to create a horizontal, firm
and level standing surface for the machine.

Fig. 78

Fig. 79

> 10°

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 96 / 252

Результаты поиска

Содержание E13-01

Отзывы: