manualshive.com logo in svg

Wacker Neuson E13-01, Руководство оператора, Страница: 194 / 252

Поделиться
Скачать
Wacker Neuson E13-01 Скачать руководство пользователя страница 194

7-28

BA EZ17 en*   1.1 *  ez17w700.fm

 

7 Maintenance

Refueling

Filler inlet 

A

 of the fuel tank is located on the right in travel direction.

1. Stop and park the machine. Stop the engine. See “Preparing 

lubrication”.

2. Unlock the lock on filler inlet 

A

 with the starting key.

3. Remove the filler cap.
4. Refuel the machine.
5. Close the filler cap.

Stationary fuel pumps

Even the smallest particles of dirt can cause increased engine wear, 
malfunctions in the fuel system and reduced effectiveness of the fuel 
filters.

Refueling from barrels

If refueling from barrels cannot be avoided, note the following points:
• Barrels must neither be rolled nor tilted before refueling.
• Protect the suction pipe opening of the barrel pump with a fine-mesh 

screen.

• Immerse the suction pipe opening down to a max. 15 cm (6 in) above 

the bottom of the barrel.

• Only fill the tank using refueling aids (funnels or filler pipes) with an 

integral microfilter.

• Keep all refueling containers clean.

Fig. 213

A

Содержание E13-01





























































































































































































































































Отзывы:

Нет отзывов