Wacker Neuson E13-01 Скачать руководство пользователя страница 60

Страница: 60 / 252

4-6

BA EZ17 en* 1.1 * ez17i400.fm

4 Putting into operation

Adjusting the retracting lap belt

DANGER

Injury hazard if the seat belt is not fastened correctly or not at all!

Fastening the seat belt incorrectly, or not at all, causes serious injury or
death.

►

Firmly fasten your seat belt over your hips before starting machine
operation.

►

Do not fasten a twisted seat belt, and do not place it over hard, edged
or fragile items in your clothes.

►

Ensure that the buckle is inserted (pull test).

►

Do not use seat belt extensions.

CAUTION

Injury hazard due to damaged or dirty seat belt!

A damaged or dirty seat belt can cause serious injury or death.

►

Keep the seat belt and buckle clean, and check them for damage.

►

Have a damaged seat belt and buckle immediately replaced by an
authorized service center.

►

Have the seat belt immediately replaced after every accident and the
load-bearing capacity of the fastening points and seat fixtures checked
by a Wacker Neuson service center.

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 60 / 252

Результаты поиска

Содержание E13-01

Отзывы: