Wacker Neuson E13-01 Скачать руководство пользователя страница 120

Страница: 120 / 252

5-30

BA EZ17 en* 1.1 * ez17b510.fm

5 Operation

Lifting gear applications

Lifting gear applications are procedures involving raising, transporting and
lowering loads with the help of lifting and fastening gear.

DANGER

Crushing hazard due to tipping over of machine!

The machine causes serious injury or death when it tips over.

►

Do not exceed the weights indicated in the load diagrams.

►

Subtract the weight of the attachment from the weight specified in the
relevant load diagram.

►

Use the machine for lifting gear applications only if the mandatory
lifting gear and safety equipment is installed, functional and enabled.

►

Only work with completely extended telescopic travel gear

WARNING

Risk of machine tipping over due to failure to pay attention to the
safe load indicator!

Serious injury or death can be caused by a machine tipping over.

►

Reduce the load until both the buzzer and the indicator light on the
display element go out.

►

Observe the load diagrams.

WARNING

Accident hazard due to switched-off or malfunctioning safe load
indicator!

Serious injury or death can be caused by a machine tipping over.

►

Switch on the safe load indicator during lifting gear applications.

►

Operate the machine only with an intact safe load indicator.

NOTICE

Machine damage due to a machine tipping over if the weight in the load
diagram is exceeded.

►

Do not exceed the weights indicated in the load diagrams.

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 120 / 252

Результаты поиска

Содержание E13-01

Отзывы: