Wacker Neuson E13-01 Скачать руководство пользователя

Страница: 159 / 252

BA EZ17 en* 1.1 * ez17t600.fm

6-1

Transportation 6

Transportation

6.1

Towing the machine

WARNING

Accident hazard due to incorrect towing!

Incorrect towing can cause accidents and serious injury or death.

►

Tow the machine away only from the immediate danger zone until it
can be loaded.

►

Only tow the machine using suitable towing equipment in connection
with suitable towing facilities, such as towing hooks, eyes, etc.

►

There must be nobody between the vehicles during towing. The lateral
safety distance is equal to 1.5 times the length of the towing
equipment.

►

Do not tow the machine if it is stuck or on a slope. Load the machine.

►

Wear protective equipment.

►

Start machine travel and tow away slowly.

NOTICE

The machine can be damaged during towing.

►

Tow the machine away only from the immediate danger zone until it
can be loaded.

►

Tow away the machine only if the engine is running and if the drive is
functional.

►

Do not tow the machine if it is stuck or on a slope. Load the machine.

►

Only tow the machine using suitable towing equipment in connection
with suitable towing facilities, such as towing hooks, eyes, etc.

►

A tractor vehicle of the same weight category must be used as a
minimum.
In addition, the tractor vehicle must be equipped with a safe braking
system and sufficient tractive power.

Information

The manufacturer’s warranty shall not apply to accidents or damage
caused by loading or transporting.

Transportation

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Похожие инструкции для E13-01

Бренды по названию

Популярные бренды

Wacker Neuson E13-01, Руководство оператора

Результаты поиска

Содержание E13-01

Отзывы:

Похожие инструкции для E13-01

Бренды по названию

Популярные бренды