Wacker Neuson E13-01 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 252

Wacker Neuson E13-01 Скачать руководство пользователя страница 34

2-20

BA EZ17 en* 1.1 * Safety_01_0.fm

2 Safety

Handling oil, grease and other substances

• When handling oil, grease and other chemical substances (for

example the battery acid, coolant), observe the safety data sheets.

• Wear appropriate protective equipment (for example protective gloves,

safety glasses).

• Be careful when handling hot consumables – burn hazard.
• In polluted environment (dust, vapors, smoke, asbestos), work only

with appropriate personal protective equipment (for example with a
breathing mask).

• Do not operate the vehicle in radioactively, biologically or chemically

contaminated areas.

Fire hazard

• Fuel, lubricants and coolants are flammable.
• Do not put the machine into operation if there is a fire hazard.
• Do not use flammable detergents.
• Keep the area around the exhaust system free of flammable materials.
• Due to hot machine parts, maintain a safe distance from easily

flammable material (for example from hay, dry leaves).
- Stop and park the machine only in fire-protected areas.

• If the machine is equipped with a fire extinguisher, have it installed in

its specific location.

• Keep the machine clean to reduce the fire hazard.

Working near electric supply lines

• Before performing any work, the operator must check whether there

are any electric supply lines in the job site.

• If there are electric supply lines, only a machine with cabin may be

used (Faraday cage).

• Keep a safe distance from existing electric supply lines.
• If this is not possible, the operator must take other safety measures (for

example switching off the current) in agreement with the operating
company or owner of the supply lines.

• If supply lines are exposed, they must be fastened, supported and

secured accordingly.

• If live supply lines are touched nevertheless:

- Do not leave/touch the cabin (Faraday cage)
- If possible, drive the machine out of the danger zone
- Warn others against approaching and touching the machine
- Have the live wire de-energized
- Do not leave the machine until the supply lines that have been

touched or damaged have been safely de-energized

«
...
32
33
34
35
36
...
»

Содержание E13-01





























































































































































































































































Отзывы:

Нет отзывов