Wacker Neuson E13-01 Скачать руководство пользователя

Страница: 123 / 252

BA EZ17 en* 1.1 * ez17b510.fm

5-33

Operation 5

Lehnhoff mechanical quickhitch system (optional)

• The quick coupler system and the attachment support must be

undamaged and clean.

• Store the operator’s manual of the mechanical quick coupler system

together with the operator’s manual of the machine.

• The described operation does not apply to the face shovel. Contact an

authorized workshop for face shovel operation.

WARNING

Crushing hazard when picking up attachments!

If an attachment is not locked correctly, it can come off and cause serious
injury or death.

►

Do not allow anyone to stay in the danger zone.

►

During locking and unlocking procedures, make sure that hands and
feet are not crushed.

►

Only use undamaged attachments and quick coupler systems.

►

Before starting any work and after every locking process, press the
attachment to the ground and quickly move it back and forth over just
over the ground a few times to check the secure locking.

►

Only operate the machine with a safely locked attachment.

WARNING

Crushing hazard when attachments are removed!

If an attachment is not removed correctly, it can tip over and cause serious
injury or death.

►

Do not allow anyone to stay in the danger zone.

►

Lower the attachment to level and firm ground ensuring stability.

Support

EZ17: Support for MS01

: Openings for quick coupler system bolts

MS01

Fig. 121

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Похожие инструкции для E13-01

Бренды по названию

Популярные бренды

Wacker Neuson E13-01, Руководство оператора

Результаты поиска

Содержание E13-01

Отзывы:

Похожие инструкции для E13-01

Бренды по названию

Популярные бренды