Wacker Neuson E13-01 Скачать руководство пользователя страница 202

Страница: 202 / 252

7-36

BA EZ17 en* 1.1 * ez17w700.fm

7 Maintenance

Cleaning the radiator

CAUTION

Burn hazard due to hot surfaces!

Hot radiators can cause burns.

►

Stop the engine and let it cool down.

►

Wear protective equipment.

NOTICE

Damage to diesel engine and hydraulic system due to dirt on the radiator.

►

Check and if necessary clean the radiator once a day.

►

In dusty or dirty work conditions, clean more frequently than indicated
in the maintenance plans.

NOTICE

Damage to radiator fins during cleaning.

►

Keep a safe distance from the radiator during cleaning.

►

Use oil-free compressed air (2 bar/29 psi max.) to clean.

Radiator

and the hydraulic oil cooler

are located in the engine

compartment.

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Remove the cover on the right.
3. Remove dust and other foreign bodies from the fins with compressed

air.

4. Install the cover on the right.

Fig. 223

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 202 / 252

Результаты поиска

Содержание E13-01

Отзывы: