Wacker Neuson E13-01 Скачать руководство пользователя страница 186

Страница: 186 / 252

7-20

BA EZ17 en* 1.1 * ez17w700.fm

7 Maintenance

6. Remove the electric connector

if it is installed on the machine. The

connector is located on the left behind the operator seat.

7. Install the lifting gear at the points provided for lifting the machine. The

mandatory length

is a minimum 1300 mm (51 in).

8. Apply tension to the canopy with the lifting gear.

CAUTION

Danger of crushing due to pre-tensioned canopy!

The pre-tensioned canopy can cause serious injuries.

►

Pay attention to the movements of the pre-tensioned canopy as you
remove the screws.

9. Remove the screws

➥

Fold up the operator's seat to improve access if necessary.

Fig. 206

Fig. 207

Fig. 208

Содержание E13-01





























































































































































































































































Результаты поиска

Содержание E13-01

Отзывы:

Wacker Neuson E13-01, Руководство оператора, Страница: 186 / 252

Результаты поиска

Содержание E13-01

Отзывы: