Wacker Neuson E13-01 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 252

Wacker Neuson E13-01 Скачать руководство пользователя страница 49

BA EZ17 en* 1.1 * ez17e300.fm

3-13

Introduction 3

Meaning

Read the Operator’s Manual before starting the machine.
Remove the starting key and carry it with you.
Injury hazard due to rotating parts.
• Open the engine cover only at engine standstill.
Burn hazard due to hot surfaces.
• Let the engine cool down.
Burn hazard due to hot fluid.
Injury hazard due to fluid escaping under pressure.
• Let the engine cool down.
• Release the pressure in the hydraulic system and open the covers

carefully.

Meaning

Crush Hazard
Do not allow anyone to stay in the swiveling range of the machine.

Position

On the engine cover

Meaning

Burn hazard due to hot surfaces (lines, plug connections, hardware,
hydraulic cylinders, couplings, etc.).

Position

On the boom on the left and right

Meaning

Reflectors

Position

At the rear left and right of the machine

Fig. 21

Fig. 22

Fig. 23

«
...
47
48
49
50
51
...
»

Содержание E13-01





























































































































































































































































Отзывы:

Нет отзывов